Sticker Workbench

Workbench guide

Check contribution before calculating a break-even quantity

Check contribution before calculating a break-even quantity

Try fixed cost 120, variable cost 1.5 per piece and price 4 in one display currency. Contribution is 2.5 per piece, so 48 pieces cover the fixed cost in this model. If price is no greater than variable cost, the tool cannot report a finite break-even quantity. Compare discounted scenarios carefully: a larger order can still contribute less than expected when the discount reduces the margin. Keep fixed setup cost separate from costs already included in the variable amount so neither side is charged twice.

How to use

Enter fixed batch cost and unit amounts. The table compares quantities with 0%, 10% and 20% discounts, subtracting the fixed cost for each independent scenario.

Keep the cost basis and the counted quantity consistent

Add only the costs that belong to the quantity in the denominator. A sheet cost divided by a whole batch count understates the result if the batch uses several sheets. Conversely, multiplying a batch cost again charges it twice. State whether material, ink, lamination, other consumables and overhead are included. A cost-per-piece result describes that selected basis; it is not automatically a selling price or an accounting total. Carry the same quantity and included-cost assumptions into the next calculator.

Keep margin and markup in their own denominators

Profit margin compares profit with selling price, while markup compares profit with cost. The same price can therefore produce different percentages for the two measures. Choose the measure you actually want to target before calculating a price. A positive difference between price and the selected cost does not include costs you left out, taxes or every selling fee. Compare the target with the price you can actually charge, and use the fee calculator when a marketplace or payment provider changes the amount you retain.

Read every fee base instead of assuming one total rate

Some fees can apply to item revenue, shipping, gift wrapping or a tax-inclusive payment amount, while fixed fees and listing counts behave differently. Read the enabled assumptions in the calculator and enter only rates that fit your own situation. The retained US Etsy reference keeps the historical check date shown in the calculator; it is not a new verification of current charges or a rule for another seller country. For a fresh decision, confirm the applicable policy yourself. The worked custom-rate examples explain arithmetic without representing a current platform quote.

Separate requested quantity from planned production

Write down the number of usable pieces you need, the yield of one sheet or repeat, and any allowance separately. A target is not automatically the quantity that fits into complete sheets. The planned run may produce extra pieces, and a percentage estimate does not guarantee an exact number of good results. Keep those extra pieces visible in the notes so they do not become an accidental cost omission. Recalculate the plan when the yield changes instead of carrying an old sheet count into a new layout.

Convert working time before adding it to material cost

When an hourly rate is used, convert minutes to hours by dividing by 60. Include the time relevant to the job, such as preparation or finishing, without charging the same work twice under another heading. A small repeated task can matter more than a single setup operation over a long run. The entered rate and time are assumptions chosen by you, not market wage recommendations. Keep a separate note of what the estimate includes so a later comparison uses the same scope.

Use one display currency throughout a calculation

Select a display currency and enter all monetary amounts on that basis. Changing the currency label here does not perform a foreign-exchange conversion. Convert outside amounts deliberately before combining them, and retain the rate and date in your own records if they matter. Decimal and grouping conventions can vary by language; use the tool's accepted input format rather than pasting an ambiguous grouped number. A locally formatted result is a display choice, not evidence that taxes, bank charges or local business rules have been applied.

Compare a changed case with the same baseline

After reproducing the worked example, change one input while keeping the others fixed. This makes it easier to see whether a difference comes from size, quantity, spacing, cost or a selected option. Record both cases and compare the actual consequence you care about, rather than choosing whichever output number is larger. A higher sheet yield can involve a less convenient orientation, and a lower nominal unit cost can rely on a larger run. Use the result to make the tradeoff explicit, not to hide it.

Keep intermediate values long enough to explain the result

Retain unrounded values while checking a worked example and distinguish them from the formatted result. Whole sheets, required pixels and selected pricing steps can use different rounding rules for different reasons. Do not apply a new rounding rule merely because two displayed values look close. If the last digit differs, first inspect the input unit, the operation order and the stated rounding behavior. Keep that explanation with the result so another person can decide whether the difference matters for the physical job or the cost model.

Open tool: Break-even & Batch Pricing

Questions & answers

When is break-even impossible?

When price is less than or equal to variable cost there is no positive contribution to cover fixed cost.

Are batch rows cumulative?

No. Each row is an independent order scenario.

Are marketplace fees included?

Include relevant variable fees in unit cost or compare with the fee tool separately.

Last reviewed ·

Reference and verification