Sticker Workbench

Workbench guide

Read a foil mask as geometry rather than material consumption

Read a foil mask as geometry rather than material consumption

Use a four-pixel test mask with two black and two white pixels, a threshold of 128 and physical size 100 × 50 millimeters. The selected area is 50%, or 2500 square millimeters. With 10 copies and a 5 millimeter film margin, the model's sequential film envelope is 110 × 60 millimeters per copy: 600 millimeters of length and 66000 square millimeters of film. Those quantities are not actual press consumption. Inspect the thresholded mask and distinguish dark artwork area from the larger carrier-film allowance.

How to use

Select a local black-and-white mask, enter its physical size and threshold, then add film margin and copies per sheet. Transparent pixels are treated as white. The strip estimate does not certify process suitability.

Understand what a threshold counts

A threshold divides image pixels according to a stated rule. Moving it can change an area count abruptly even when the artwork looks almost unchanged. Antialiased edges contain intermediate values, so a mask may include a thin fringe at one setting and exclude it at another. Compare a deliberately simple black-and-white test image first. Then inspect the real mask and write down the selected threshold. Do not rename the resulting area as actual ink or material consumption unless a separate, appropriate production model supports that interpretation.

Check what transparency means on the assumed background

The image analysis tools composite transparent pixels onto a white background before measuring them. A transparent area therefore does not behave like a black printed mark. That assumption may differ from a design intended for colored stock or a transparent substrate. Preview the artwork on its intended background and prepare an explicit mask when the physical process requires one. Keep the analysis result separate from the appearance of a viewer's transparency checkerboard, which is an interface aid rather than part of the image being measured.

Keep image statistics separate from physical consumption

A percentage of dark or colored pixels describes an image under the stated conversion and threshold rules. It does not measure press ink, transfer efficiency, foil waste, cleaning losses or the cost of a run. Compare artwork using the same assumptions and inspect what changed before drawing a production conclusion. Keep physical dimensions and copy count separate from a normalized percentage. If a material estimate is needed, use a separately justified process model instead of multiplying a screen statistic by an invented consumption rate.

Write down the measurement before opening the calculator

Measure the actual item, not the outside of its packaging or a screen preview. Record the unit beside each number. This site converts one inch to exactly 25.4 millimeters; changing a unit selector does not make an uncertain measurement more precise. Measure both axes and check whether a folded, rounded or thick object needs additional clearance. Keep the original measurement separate from any allowance you add later, so another person can reproduce the calculation without guessing which dimensions already contain extra space.

Check the repeat direction on a roll

A roll plan has an across-roll count and a lengthwise repeat count. The cutting length, spacing and usable roll width determine those counts; the leftover length is not automatically another usable repeat. Record which direction the artwork runs and check any leader, trailer or handling allowance separately if it is not part of the model. A rectangle-based estimate does not model winding, tension, slippage or machine setup. Compare the estimated count with a short trial before treating the full roll as guaranteed usable stock.

Separate requested quantity from planned production

Write down the number of usable pieces you need, the yield of one sheet or repeat, and any allowance separately. A target is not automatically the quantity that fits into complete sheets. The planned run may produce extra pieces, and a percentage estimate does not guarantee an exact number of good results. Keep those extra pieces visible in the notes so they do not become an accidental cost omission. Recalculate the plan when the yield changes instead of carrying an old sheet count into a new layout.

Check the assembled item as well as its flat dimensions

A flat drawing cannot fully describe a finished card, wrapped label or attached tag. Make a sample with the intended stock and inspect the assembled result. Check where a seam, overlap, score or hole sits relative to important artwork. A material can bend, compress or resist a fold in ways that simple geometry does not predict. Keep the measured flat values and your observed adjustment as separate notes, and rerun the calculator if the tested specification changes rather than editing the final file by eye.

Make a small physical proof before repeating the output

Print one sample with the same paper, application and settings you plan to use for the run. Disable an unintended fit-to-page option when checking a file intended for actual-size output. Measure a known dimension, inspect important edges and test the relevant action: cut, fold, scan, insert or attach. A correct mathematical layout can still fail because of feeding, registration, material thickness or printer scaling. Record the observed difference before changing the model, so a correction addresses a measured problem instead of a guess.

Open tool: Foil Area Assessment

Questions & answers

What counts as foil area?

Pixels at or below your luminance threshold count as masked area. Anti-aliasing and threshold choice change the result.

How is film length estimated?

One strip per copy uses the image height plus margin at both ends. Multiply by copies per sheet; no nesting optimization is assumed.

Will the foil adhere correctly?

This tool cannot determine pressure, heat, adhesion or equipment compatibility. Test the actual process.

Last reviewed ·

Reference and verification