Sticker Workbench

Workbench guide

Read cumulative score positions on a flat card

Read cumulative score positions on a flat card

Use a flat width of 210 millimeters, height 148 millimeters, the thirds pattern and a compensation input of 1 millimeter. The model's panels are 70.5, 70.5 and 69 millimeters, with score positions at 70.5 and 141 millimeters from the left edge. This arithmetic compensation is not a universal paper-thickness recommendation. Keep panel order visible when placing text and images, then fold a physical sample to check closure. Do not treat equal-looking preview columns as proof that the finished panels should all be identical.

How to use

Enter the flat card size, fold pattern and effective thickness adjustment. Dashed lines are score guides. Test a sample before production; this is not structural certification.

Inspect panel widths before making a folded proof

The full flat width and the finished folded width are different measurements. Start with the flat piece, choose the fold pattern and inspect every panel width and cumulative score position. A compensation value in the tool is a simplified arithmetic adjustment, not a measured material property supplied by the software. Paper thickness, grain direction and folding equipment can change what works. Make one folded proof, check that panels close in the intended order, and keep text away from creases and overlap areas.

Write down the measurement before opening the calculator

Measure the actual item, not the outside of its packaging or a screen preview. Record the unit beside each number. This site converts one inch to exactly 25.4 millimeters; changing a unit selector does not make an uncertain measurement more precise. Measure both axes and check whether a folded, rounded or thick object needs additional clearance. Keep the original measurement separate from any allowance you add later, so another person can reproduce the calculation without guessing which dimensions already contain extra space.

Separate the finished item from the printable canvas

The trim size describes the finished object after cutting. A sheet or image canvas may be larger because it also contains margins, bleed or marks. Start with the finished width and height, then add the other spaces explicitly. Do not enter a dimension that already includes bleed and ask the calculator to add the same bleed again. Label your notes with the intended finished size, and compare that size with the exported file rather than assuming the preview border is the cut edge.

Keep important content inside a safe zone

A safe zone moves important content inward from the trim edge. Place small text, a logo, a code and other critical details inside it before filling the background out to bleed. A chosen safe distance is an allowance, not a guarantee about a particular cutter. Avoid putting a thin decorative border exactly on the trim, where a small cutting shift becomes obvious. Examine narrow corners and the space beside a hole or fold separately; a rectangular inset alone does not describe every risk.

Read the grid calculation rather than trusting empty space

A regular sheet grid counts complete columns and rows after subtracting outside margins and allowing gaps between items. Counts round down because a fraction of an item is not printable stock. A little unused space along an edge may be unavoidable in that grid. Area utilization is useful for comparing arrangements, but it does not prove that a layout is practical to feed, cut or sort. Check the placement diagram and the count together, especially when an item nearly touches the usable boundary.

Inspect SVG dimensions and layers before using a cutter

An SVG can describe geometry at a physical size through its outer dimensions and coordinate system. Confirm the width, height and viewBox on import instead of assuming a drawing application preserves them unchanged. Trim outlines, bleed and safe-zone guides serve different purposes; do not send every visible guide to a cutter as a cut path. This site's simple outlines are planning geometry, not a device-specific cutting job. Check layers, stroke handling and an actual-size sample in the software that will control your equipment.

Check the assembled item as well as its flat dimensions

A flat drawing cannot fully describe a finished card, wrapped label or attached tag. Make a sample with the intended stock and inspect the assembled result. Check where a seam, overlap, score or hole sits relative to important artwork. A material can bend, compress or resist a fold in ways that simple geometry does not predict. Keep the measured flat values and your observed adjustment as separate notes, and rerun the calculator if the tested specification changes rather than editing the final file by eye.

Make a small physical proof before repeating the output

Print one sample with the same paper, application and settings you plan to use for the run. Disable an unintended fit-to-page option when checking a file intended for actual-size output. Measure a known dimension, inspect important edges and test the relevant action: cut, fold, scan, insert or attach. A correct mathematical layout can still fail because of feeding, registration, material thickness or printer scaling. Record the observed difference before changing the model, so a correction addresses a measured problem instead of a guess.

Open tool: Fold & Score Placement

Questions & answers

Is the thickness adjustment a material model?

No. It is a geometric allowance you enter. Paper grain, coating and equipment affect the actual fold.

Which folds are included?

Half fold, three-panel roll fold and three-panel accordion. The panel widths always add up to the entered flat width.

Can I send this straight to a cutter?

The SVG separates outlines and dashed score guides, but your equipment settings and a physical test are still required.

Last reviewed ·

Reference and verification