Sticker Workbench

Workbench guide

Calculate a wrap label from a measured container

Calculate a wrap label from a measured container

For a bottle example, enter circumference 200 millimeters, overlap 10, clearance 2, available face height 70 and label height 50. The model returns width 208 millimeters from 200 - 2 + 10, and the height fits within the 66 millimeters left by top and bottom clearances. This is a simplified flat estimate. Measure the container where the label will sit, and test the seam and adhesive on a sample. Taper, curvature, stretch and the desired overlap can require a different physical specification.

How to use

Choose a package shape and enter measured dimensions. Wrap labels use perimeter minus clearance plus seam overlap; face labels reserve clearance at both edges. This tool checks layout only, not legal labeling content.

Write down the measurement before opening the calculator

Measure the actual item, not the outside of its packaging or a screen preview. Record the unit beside each number. This site converts one inch to exactly 25.4 millimeters; changing a unit selector does not make an uncertain measurement more precise. Measure both axes and check whether a folded, rounded or thick object needs additional clearance. Keep the original measurement separate from any allowance you add later, so another person can reproduce the calculation without guessing which dimensions already contain extra space.

Separate the finished item from the printable canvas

The trim size describes the finished object after cutting. A sheet or image canvas may be larger because it also contains margins, bleed or marks. Start with the finished width and height, then add the other spaces explicitly. Do not enter a dimension that already includes bleed and ask the calculator to add the same bleed again. Label your notes with the intended finished size, and compare that size with the exported file rather than assuming the preview border is the cut edge.

Add bleed only where the artwork needs it

Bleed extends a background beyond the intended cut. It is not extra room for text, and it does not correct an inaccurate printer scale. Obtain the required amount from the print provider or your tested cutting workflow. For a rectangular item, the new width is the trim width plus twice the bleed, and the new height is the trim height plus twice the bleed. This does not double the original width or height. Check neighboring items as well: two artworks extending into the same gap may overlap even when their trim outlines do not touch.

Keep important content inside a safe zone

A safe zone moves important content inward from the trim edge. Place small text, a logo, a code and other critical details inside it before filling the background out to bleed. A chosen safe distance is an allowance, not a guarantee about a particular cutter. Avoid putting a thin decorative border exactly on the trim, where a small cutting shift becomes obvious. Examine narrow corners and the space beside a hole or fold separately; a rectangular inset alone does not describe every risk.

Check the assembled item as well as its flat dimensions

A flat drawing cannot fully describe a finished card, wrapped label or attached tag. Make a sample with the intended stock and inspect the assembled result. Check where a seam, overlap, score or hole sits relative to important artwork. A material can bend, compress or resist a fold in ways that simple geometry does not predict. Keep the measured flat values and your observed adjustment as separate notes, and rerun the calculator if the tested specification changes rather than editing the final file by eye.

Inspect SVG dimensions and layers before using a cutter

An SVG can describe geometry at a physical size through its outer dimensions and coordinate system. Confirm the width, height and viewBox on import instead of assuming a drawing application preserves them unchanged. Trim outlines, bleed and safe-zone guides serve different purposes; do not send every visible guide to a cutter as a cut path. This site's simple outlines are planning geometry, not a device-specific cutting job. Check layers, stroke handling and an actual-size sample in the software that will control your equipment.

Interpret PNG dimensions and density together

A PNG stores a whole number of pixels on each axis. A physical dimension at the chosen density may therefore require a small rounding adjustment. Compare the expected pixel size with the exported file and check the density metadata when your application uses it. Printing at a different scale changes the resulting physical size even if the metadata is correct. Retain the intended millimeter or inch dimensions with the job notes, and use a physical proof when a small size difference affects fitting or alignment.

Make a small physical proof before repeating the output

Print one sample with the same paper, application and settings you plan to use for the run. Disable an unintended fit-to-page option when checking a file intended for actual-size output. Measure a known dimension, inspect important edges and test the relevant action: cut, fold, scan, insert or attach. A correct mathematical layout can still fail because of feeding, registration, material thickness or printer scaling. Record the observed difference before changing the model, so a correction addresses a measured problem instead of a guess.

Open tool: Packaging Label Layout

Questions & answers

Does this supply a compliant ingredient or product label?

No. It supplies geometry only. You must check all legal labeling requirements separately.

Is the overlap added to every shape?

It is added to bottle and box wraps. Pouch face labels use edge clearance and do not wrap.

Are curved or tapered surfaces modeled?

No. Measure and test a sample on the actual package, including curves, seams and adhesive behavior.

Last reviewed ·

Reference and verification